FM-10 RC Timer

Foolproof operation:
1) Turn on radio TX. (TX must be bound to the RX in model).
2) Connect battery.
3) Push and hold button, motor starts.
4) Let go of button, motor timer starts, and program runs until model DT's.
5) To stop running motor without launching, push button again.
6) After flight is over, battery must be disconnected before program will run again.


Timer holds 3 programs.
Each program can be programmed to different values, then quickly selected using the FM-9F1Q programmer box.
 - Climb power and duration.
 - First servo position and tme ftermotor stops.
 - Second servo position and time after motor stops.
 - Third servo position and time after motor stops.
 - DT servo position and time after motor stops.
 - DT servo position when throttle on TX put to zero position.
 - DT servo position if model flies out of radio range.
 - Servo direction of travel.