Materials pack to build 2 sets of SciOly Helicopter Rotors.
contains:
0.8mm Carbon Rods
0.020" music wire
Laser-cut ribs & dime size balsa discs
Covering material
Rotor hubs
Hanger loop and button
Thrust washers
For building your own design rotor
|
Our own precision balsa stripper. It uses standard single edge razor blades instead of the usual #11 blade. Cut width set by plastic spacers, 3 off 1/16", 1 each 1/32" and 1/64" included. Cut depth is adjustable.
Extra keen blade included.
|
Precise digital scale measures 0 - 300g
with a resolution of 0.01g.
A necessary tool for indoor rubber power.
|
Silicon based Rubber Lubricant
|
2025/2026 Helicopter Kit.
Kit makes 3 complete Helicopters.
Rotor diameter ~33.2 cm (13"), length 40.2 cm. (16")
Comes with two rotor building jigs, enough rubber for 6 motors, "o" rings, 3D Printed prop hub & hanger and carbon rods.
|
Torque meter kit, Carbon Fiber body tube, swivels to align with rubber. Approximate range 0 - 2 oz-in (0.014 N-m), suitable for up to 1 loop of 1/8" Super Sport.
|
Universal indoor model stand, ~9" tall for all stick fuselage type models, fixed wing and helicopters. Great for safely holding delicate Science Olympiad models.
|
10 Pipettes for glue application.
Capacity 4.6ml. Material is LDPE.
|
6 off - 1/4" OD - 1/8" ID (No. 6) Buta-N O-Rings
|
6 off - #4 Buta-N O-Rings
|
6 off - 15/64" OD - 7/64" ID (No. 5) Buta-N O-Rings
|
Traditional boiled green soap and glycerene lube.
|
1/4" wide masking tape - 60yd roll
color may vary according to availability
|
10g calibration weight for checking
digital scales.
|
Div. C Wright Stuff prop diameter checker
Laser cut from Baltic Birch
plywood, for checking your Tower
|
3D Printed plastic box corners, 1.125" x 1.125" x 1.125".
They make it easy to construct a rectangular box from foam board or other rigid material.
|
Laser-cut Hard Teflon Thrust Washers, 6 off
Size #0 - 1/8" OD for 0.020" shaft
|
Laser-cut Hard Teflon Thrust Washers, 6 off
Size #1 - 1/8" OD for 1/32" shaft
|
Laser-cut Hard Teflon Thrust Washers, 6 off
Size #2 - 3/16" OD for 3/64" shaft
|
10 heavy duty measuring/mixing cups.
Graduations 1 - 4 tsp.
No ribs on inside for easy mixing.
| |