112g Deluxe Alphatic Resin, slower drying than PVA, sands better than PVA.
|
112g Special modelling PVA glue that contains no fillers. "The 5 minute white glue".
|
500g Special modelling PVA glue that contains no fillers. "The 5 minute white glue".
|
Ultra thin, foam safe, oderless,penetrating!
Bonds: wood, foam, plastic,carbon fiber, GRP.
50ml bottle, comes with dispensing nozel.
|
Ultra thin, foam safe, oderless,penetrating!
The low viscosity formula and needle applicator ensure easy application directly onto open or pre-assembled joints typically found in Laser cut kits.
|
Price: It's too cold to ship at the moment.
Wax adhesive for holding miniatures in place
repositionable and removable with soap and water.
Great for holding small screws on driver!
|
Coats and seals wood grain prior to painting and finishing. Use with all types of paints including enamel, cellulose, acrylic or epoxy.
|
Clear, tough, gap filling adhesive.
Bonds foam, plastic & metal.
Produces flexiblebonds in ways other glues cannot.
|
For rapid foam modelling. Very high tack glue. Strong hold, allows adjustment.
Dries clear, flexible. Ideal for foam model aircraft. Bonds: Depron, white, blue and EPO foams, wood and plastic.
|
150ml Water clean up 'Heat Activated' adhesive from Deluxe Materials for all kinds of film to wood and film itself. Coverite Coverlite & other heat shrink covering materials.
|
Clear drying paste for bonding tissue paper used on traditional model airplanes.
The formulation allows delicate tissue paper to be placed onto airframes and smoothed without tearing.
|
A specially formulated water soluble dope for shrinking, strengthening and wind-proofing model tissue paper or Polyspan.
|
250g for protecting foam and wood surfaces.
|
Primer to promote adhesion of Cyano to
difficult shiny plastics and foam 50ml
Including EPP, EPO, Polypropylene, silicone and nylon.
|
Water based laminating and finishing resin for balsa and foam models.
|
A high strength, rapid setting, epoxy glues that are formulated to set hard, clear and sandable, and tolerate mixing ratio errors. These are BIG bottles!
|
Super thin epoxy for wing skinning, laminating and moulding.
|
0.6oz/sq.yd or 24g/sq.m
Size: 2 sq.m
Super lightweight fiberglass cloth for surfacing and reinforcing
|
1.5 oz/sq.yd or 51g/sq.m
Size: 1 sq.m
Lightweight fiberglass cloth for laminating, surfacing and reinforcing
|
2.3 oz/sq.yd or 78g/sq.m
Size: 1 sq.m
Lightweight fiberglass cloth for laminating, surfacing and reinforcing
|
1oz/sq.yd or 34g/sq.m
Size: 1 sq.m
Lightweight fiberglass cloth for laminating, surfacing and reinforcing
|
Milled Carbon Fiber 50ml
for the ultimate strengthening of epoxy resin
|
Milled glass fibres are simply stirred into epoxy and polyester resins to thicken and improve their toughness, flexural strength, crack resistance and dimensional stability.
|
10g/sq.m (0.3oz/sq.yd)
Carbon Fiber surfacing and reinforcing tissue
|
100g/sq.m (3oz/sq.yd)
Teasable Carbon Fiber
for contouring or shaping
75 x 25 cm
|
Liquid masking film. Paint it on, let it dry then cut pattern with #11 blade, and peel away the areas to be painted. Peel remaining film after paint has dried.
|
Liquid masking film. Paint it on, let it dry then cut pattern with #11 blade, and peel away the areas to be painted. Peel remaining film after paint has dried.
|
Lightweight, easy sanding filler for resin
250ml
|
Strong, lightweight filler which sands easily.
|
Strong, lightweight filler which sands easily.
|