5 1/2" prop kit
makes 5 props with 0.010" blade thickness
you set the pitch as desired.
|
9.5" Medium IFFS prop on hanger, blade color is now black.
This is the prop from Indoor Free Flight Supply company, it weighs ~2g. Can be trimmed to a smaller size with scissors!
|
Delrin Prop Hanger Mount for IFFS Props. Package includes 2 mounts and two plywood spacers. This is the same mount that is use in our Cloud Dancer and Cloud Hopper kits. Can be used on any 1/8" thick motor stick. Note: Left side thrust designed in.
|
7" prop kit
makes 5 props with 0.015" blade thickness
you set the pitch as desired.
|
Measures pitch in mm ratio at 70% radius for 140mm props on prop hanger or bare shaft.
|
Measures pitch in inches at 70% radius for 5 1/2" props on prop hanger or bare shaft.
|
Measures pitch in inches at 70% radius for 6" props on prop hanger or bare shaft.
|
Used to increase the pitch of commercial rubber power plastic props. Push prop down wedge cutout and let it cold flow, or heat gently in a very cool oven for a few mins.
|
5 1/2" Prop on hanger for 1/8" x 3/8" stick models
ONLY ONE AVAILABLE
|
6" Prop on hanger for 1/8" x 3/8" stick models
|
6" prop kit
makes 5 props with 0.010" blade thickness
you set the pitch as desired.
|
|
Measures pitch in inches at 70% radius for 7" props on prop hanger or bare shaft.
|
|
|
|
|
|
|
Tractor, 2.0g
Only 3 left!
|
|
|
|
|
Tractor, folder with springs
|
|
|
|
|
Measures P/D ratio at 70% point for 3" - 12" diameter FF props.
|
1" Square 1/32" A/P plate for Gizmo Nose button - 2 off
|
1" Round 1/32" A/P plate for Gizmo Nose button - 2 off
|
1" Square 1/64" A/P plate for Gizmo Nose button - 2 off
|