|
|
Custom Electric Motor Mounts
Adaptor motor mount for converting a model from a Cox 020 to an outrunner. Rear plate has Cox Pee-Wee tank mount hole spacing, front plate had 2mm x 9mm, 12mm & 16mm outrunner mount hole pares. Supplied with four 3/4" spacers. (Motor not included)
|
Adaptor motor mount for converting a model from a Cox 020 to an outrunner. Rear plate has Cox Pee-Wee tank mount hole spacing, front plate had 2mm x 9mm, 12mm & 16mm outrunner mount hole pares. Supplied with four 1/2" spacers. (Motor not included)
|
Adaptor motor mount for converting a model from a COX 049 to an outrunner. Rear plate has Cox tank mount hole spacing, front plate had 16mm/19mm outrunner mount holes. Stand-off height 1 3/16". (Motor not included)
|
Mount hole spacing 0.645" x 1.057"
Motor screws, three off #2 holes on xx circle
Cut from 1/16" Delrin
|
Mount hole spacing 0.645" x 1.057"
Motor screws, M2, spacing 12mm x 16mm
Cut from 1/16" Delrin
|
Mount hole spacing 0.645" x 1.057"
Motor screws, M3, spacing 16mm x 16mm
Cut from 1/16" Delrin
|
Mount hole spacing 31mm x 31mm
(same as Cobra 2203 2800kV)
Motor screws, M3, spacing 16mm x 19mm
Cut from 3/32" Delrin
| | |
|
|
|