2022 WS e'Minnow 45 cm span - 2 pack

No carbon parts, no delicate covering film.  A good solid flyer that is easy to trim.

This is an all wood airplane (except for the click together motor and capacitor mounts), no fancy materials that are difficult to handel.  All wood parts in the kit are precision laser cut, only a light sanding of the edges is needed to give the model a professionally built look.
The kit includes two complete power sustems which are prewired.  The power system has a suitable sized motor, two props, a 5F capacitor and a charging jack.  One charger battery box is also included in the kit.
With the stock power system it is capable of flight times of over 43 seconds without any modifications.  With modified prop, longer motor runs will be achieved and longer flight times.  Extra props are included for you to experiament with. 

Kit contains full size plans, all laser cut wood parts and covering to build TWO ~8g airplanes.  Two Delrin motor mounts and two capacitor mounts.  Two complete power systems, two extra props, one charging battery box.   You will need to provide two AAA dry cell battries, wood glue, perminant glue stick, masking tape (1/4" wide preferred), non-stick paper to finish building the model.
All wood has been carefully selected to yield a relatively robust airplane that weighs ~8g.  The wing and stabilizer spars are tapered, and have built in gussets at each joint.  The fuselage stick has the stabilizer incidence pre-cut, and the symetrical wing is mounted parrallel to the fuselage stick, so it doesn't matter which way round it is mounted, the laser cut ribs are cambered, but symetrical front to back, so you can't build two right wings!  There is even a pair of dihedral supports and a balancing jug included in the kit.  It's almost fool proof.

TRY SOME EXPERIAMENTS TO IMPROVE THE PERFORMANCE AFTER YOU HAVE SUCESS WITH THE BASED MODEL: