Retro RC LLC Web Site

Email Address:

Password:

Remember Me

Create an account
Forgot Password?

A new generation of laser-cut FF & RC kits, with all needed hardware included in most full kits.

Many of our RC electric models are approved for the AMA Park Flyer program.

FF kits contain good quality rubber, props, shafts, bearings, etc.

Select a category (upper right of page) to browse our products.

WE WILL BE OUT OF THE OFFICE 9/17 - 9/23 & 9/28 - 10/16.

PLEASE PLACE URGENT ORDERS IN PLENTY OF TIME!

Digital Pocket Scale

Price: $19.98

Quantity:

Precise digital scale measures 0 - 300g with a resolution of 0.01g. A necessary tool for indoor rubber power.

Our own precision balsa stripper. It uses standard single edge razor blades instead of the usual #11 blade. Cut width set by plastic spacers, 3 off 1/16", 1 each 1/32" and 1/64" included. Cut depth is adjustable. Extra keen blade included.

Cloud Copter

Price: $47.00

Quantity:

2025/2026 Helicopter Kit. Kit makes 3 complete Helicopters. Rotor diameter ~33.2 cm (13"), length 40.2 cm. (16") Comes with two rotor building jigs, enough rubber for 6 motors, "o" rings, 3D Printed prop hub & hanger and carbon rods.

Prop Hanger loop and button for 0.020" shaft - 3 sets

Price: $3.50

Quantity:

Hanger loop for 1/8" motor sticks, nose button for 0.020" prop shaft. Three sets included. Glue hanger loop to motor stick with CA. This allows you to easily change out prop and shaft assembly on your stick models.

Prop Hanger loop and button for 0.026" shaft - 3 sets

Price: $3.50

Quantity:

Hanger loop for 1/8" motor sticks, nose button for 0.026" prop shaft. Three sets included. Glue hanger loop to motor stick with CA. This allows you to easily change out prop and shaft assembly on your stick models.

Prop Hanger loop and button for 0.032" shaft - 3 sets

Price: $3.50

Quantity:

Hanger loop for 1/8" motor sticks, nose button for 0.032" prop shaft. Three sets included. Glue hanger loop to motor stick with CA. This allows you to easily change out prop and shaft assembly on your stick models.

Prop Hanger, Button, Hub and Thrust Washers for 0.020" shaft

Price: $2.50

Quantity:

Hanger loop for 1/8" motor sticks, nose button for 0.020" prop shaft, prop hub for 1.0mm carbon rods and two thrust washers. Prop shaft and carbon rods not included.

Prop Hanger, Button, Hub and Thrust Washers for 0.026" shaft

Price: $2.50

Quantity:

Hanger loop for 1/8" motor sticks, nose button for 0.026" prop shaft, prop hub for 1.0mm carbon rods and two thrust washers. Prop shaft and carbon rods not included.

Prop Hanger, Button, Hub and Thrust Washers for 0.032" shaft

Price: $2.50

Quantity:

Hanger loop for 1/8" motor sticks, nose button for 0.032" prop shaft, prop hub for 1.0mm carbon rods and two thrust washers. Prop shaft and carbon rods not included.

Ritzy 20

Price: $44.98

Quantity:

Small field 5F Capacitor powered FF model. Kit includes two power systems. A unique design by Mark Freeland. This is a very quick to build.

3D printed DT Band Hooks - 2 off

Price: $1.00

Quantity:

two off 3D Printed DT Band Hook, material is PETG. Much easier than threading a band through a loop of DT line! 1/2" x 3/16" x 1/16", weight 0.066g each.

1/8" ID x 3/8" bobbin

Price: $0.90

Quantity:

1/8" ID x 3/8" bobbin, sold individually generous lead in for easy insertion of rear peg 3D printed in PLA

1/8" ID x 1/2" bobbin

Price: $1.00

Quantity:

1/8" ID x 1/2" bobbin, sold individually generous lead in for easy insertion of rear peg 3D printed in PLA

1/8" ID x 5/8" bobbin

Price: $1.10

Quantity:

1/8" ID x 5/8" bobbin, sold individually generous lead in for easy insertion of rear peg 3D printed in PLA

1/8" ID rear hooks

Price: $1.00

Quantity:

1/8" rear hooks for winding outside the model without a blast tube, 2 pairs 3D printed in ABS

3/16" ID x 3/8" bobbin

Price: $1.00

Quantity:

3/16" ID x 3/8" bobbin, sold individually generous lead in for easy insertion of rear peg 3D printed in PLA

3/16" ID x 1/2" bobbin

Price: $1.10

Quantity:

3/16" ID x 1/2" bobbin, sold individually generous lead in for easy insertion of rear peg 3D printed in PLA

3/16" ID x 5/8" bobbin

Price: $1.20

Quantity:

3/16" ID x 5/8" bobbin, sold individually generous lead in for easy insertion of rear peg 3D printed in PLA

3/16" ID rear hooks

Price: $1.50

Quantity:

3/16" rear hooks for winding outside the model without a blast tube, 2 pairs 3D printed in ABS

1/4" ID x 1/2" bobbin

Price: $1.30

Quantity:

1/4" ID x 1/2" bobbin, sold individually generous lead in for easy insertion of rear peg 3D printed in PLA

Our kits are all designed and manufactured in Michigan, USA


	Your cart is empty.