7.2 m Carp Fishing Pole, Suitable for mounting Thermal Detector. Collapses to 29" for easy transport. Pole has 12 sections, use bottom 9 and the thermistor will be ~17' above ground level. Fits over a 11/16" spike, not included.
|
RRC's Custom Thermal Detector with e'Paper Display and Thermistor Head. You supply your own pole.
I make them to order, and personalize each one. Please allow about one week for delivery. Can be supplied in deg F (default) or deg C if requested.
|
This is a shielded design which prevents wind blowing directly on the Thermistor element. Air enters through bottom holes, passes the sensing element and exits through the gap below the top plate. Cable length is `10'
|
Birch Plywood mount for your
thermistor pole, and robust EPP
shield for the thermistor.
Instruments not included!
|
This is an open cage design to allow maximum airflow to the thermistor element while still protecting it from mechanical damage. Cable length is ~10'. (Foam topper and bamboo skewer not included).
|
Robust EPP thermistor shield.
|
20' long, 1 3/8" wide, 1/2 mil metalized Mylar streamer for the top of your thermal detecting pole
|
3/16" diameter fuse
~ 90sec per division
|
|
Bottle rack with four 8 dram vials, measures 6.625" x 1.625", hole diameter 1 1/16". Extra vials available in four packs.
Use stand alone on bench or in the e'Flight box's tip out bin.
|
Four 8 dram vials. Rack not included.
|
|
Hi-Start kit with 1/16" SS rubber
|
Hi-Start kit with 3/32" SS rubber
|
Hi-Start kit with 1/8" SS rubber
|